Replace Lock in UPVC Door
A professional locksmith should be called when your door locks made of upvc aren't functioning properly. They are fast, efficient and can complete the task to a very high standard.
It's not that difficult to replace the bar lock made of upvc. It's not hard to change a upvc barrel lock.
Lock the barrel off.
uPVC windows and doors are commonplace in a variety of properties. They let natural light enter the home and can be opened with the correct key. Switching the barrel of a lock on the uPVC door is a simple task that can be completed in just five minutes. If you have lost your keys, or a tenant has left but has not returned them, or if the lock barrel is damaged it is a simple solution.
The first thing you have to do is remove the handle screws. This is to remove the handles out of the way to access the barrel screw that locks them. Do not loosen the screws too quickly, as this can damage the handles.
After the screws are removed, locate the screw that holds the lock in position on the inside of your door. It is a screw that stands out and is a different color than the screws on the door. Remove the screw using the Phillips screwdriver. Next, take the present key that is used for the lock and put it inside the barrel. Turn it as far to the right as you can. This will let the barrel go, making it easier to open the door.
After loosening the screw, you are now able to break the pins that hold the Euro Cylinder in place. To accomplish this, you'll need strong pliers or mole grips. Grab the protruding end of the euro cylinder, and bend it from side to side, and then up and down. This will break the support pins holding it in place.
The process of installing the new cylinder could be done after the old one was removed. To ensure you purchase the correct replacement, you must first measure the lock cylinder. This can be done by measuring the distance between the center of circular keyhole and the center square spindle. The measurement should be taken from the upper spindle.
Change the Cylinder
The euro cylinder is the principal locking mechanism of a upvc door. They are simple to replace and don't require a locksmith or handyman service. If your lock doesn't have this security feature, you must replace it with one that does. They aren't expensive and could help you save money and time in the case that your locks are compromised.
To start to begin, open the door and stand in front of it so you can reach the screw for retaining the handle with your hand or an appropriate tool. Let it loosen a bit or maybe a quarter turn to get the job started.
After this is completed the cylinder should slide out easily because it will no longer be fixed by the screw. Next, you'll need to determine the size of replacement cylinder that you require. There are around 25 different sizes to choose from. You should bring your old cylinder with you when you purchase the new one to ensure it fits.
If you're not certain of the size then take a measurement from the center of the screw hole to the end of the cylinder. You can only ensure that you are buying the right sized cylinders for your door made of upvc by measuring from the center of the screw hole to the end of the cylinder.
Install the new cylinder on your door in the opposite direction you removed the old one. It may be a little difficult to align the lock cam but this is usually just an issue of alignment and should come right eventually.
The next step is to screw in the long securing screws. After this is done, you can test the new cylinder and make sure it is securely in the door. Then, you can reconnect the handle to the door and then test it again. If everything is fine, your cylinder lock in your upvc door has been changed and you should have added a second layer of security to your home.
Change the handle
There are many reasons a door knob or handle may become loose. It can be due either to wear and tear on the handle or the square spindle inside the handle. In this case the door handle will need to be replaced.
Firstly it is important to make sure the door is propped open and won't close when you are the removal and replacement of the handle. Then remove the screws from the inner surface of the plate by using a screwdriver. This will release the handle from the plate. Be careful not to loose these screws as they will have to be re-screwed into place later.
After the handles have been removed, you can now access the cylinder lock that is inside the door. The lock will be a circular or bulb-shaped cylinder. It is only found in multi-point locks used on upvc doors as well as doors made of aluminum. It is like changing the handle. The only difference is that you will need to remove the old cylinder from the door and replace it with a brand new one.
When choosing a replacement handle it is important to consider its size. Make sure the handle you choose is similar in size to the original because it will have to be able to fit over the screws that secure the handle. Start by looking up the table of sizes that provides the most popular sizes of replacement handle plates and their keyhole centers.
Consider upgrading your upvc door handles to a higher security standard, such as a Sold Secure SS301 set or 2* Kitemark security handles. This will improve the security of your house and make it easier to operate your door. The cost of these sets will be a bit more expensive, but the extra security and peace of mind security is worth it. You don't want to have to push the door handle continuously up and down to open and close it.
Change the Lock
The lock on your uPVC can be a weak point for thieves. It is possible to upgrade your uPVC door to a multipoint lock to ensure it is secure. This would include a deadbolt and an open hook to ward off criminals. You can get a professional locksmith to help you, but you can also do it yourself. The process is simple and simple. You will only need just a few tools.
The first step is to loosen the screws that are holding the handle. You can remove the screws using a screwdriver and put them in a secure place. You can then raise the handle and expose the screw holding the cylinder. This screw can be unscrewed and replaced with a new one. Make sure the screw is of the same size as the original. It should be aligned properly with the barrel of lock.
The process of changing the lock on your uPVC door could appear daunting. You depend on it to protect your home, and making an error could cause you to be without a way to open the door. If you know how, it is fairly simple and costs less than contacting an expert locksmith.
You will need to remove the faceplate on the inside of the lock in order to replace the lock. You'll need to look for the screws inside the door and the retaining bolt outside the door. Once you have these screws in your hands, you can remove and replace the faceplate.
You might need to alter the lock on your uPVC door for several reasons. double glazed window lock mechanism replacement could be due to a lost key, a tenant moved out and didn't return keys, or you simply need to improve the security of your home.
Changing a uPVC lock can be done by anyone with basic DIY skills. You'll need to examine the internal hinges of the mechanism, which can be difficult to do if the lock is sticking. If the hinges are lubricated it is a simple repair. However, if you aren't confident doing this, it's best to consult a professional.